|
rigid, powerful and versatile |
|
with a wide range of speeds and feeds |
|
for both small and heavy jobs |
| streamlined construction, rugged and vibration free |
| 7.5 / 5.5 kW motor for heavy stock removal |
| power operated feeds and rapid traverses in all directions |
| independent main drive and feed motors |
| wide range of spindle speeds and feeds |
| instantaneous braking of spindle and table drives through electro-magnetic clutches |
| high rate of rapid traverse |
| light fingertip push button controls |
| inching push button for speed and feed drives |
|
specifications |
|||||
| model | FN3/FN3E | FN3/FN3E | FN2/FN2E | ||
| H = Horizontal | U = Universal | H = Horizontal | |||
| V = Vertical | V = Vertical | ||||
| U = Universal | |||||
| TABLE | overall dimensions (length X width) | mm | 2050 x 335 | 2060 x 300 | 1520 x 310 |
| clamping area (length x width) | 1600 x 355 | 1600 x 300 | 1350 x 310 | ||
| number and width of T slots | 3 - 16 | ||||
| centre distance between T slots | 80 | 63 | 65 | ||
| power operated traverse: longitudinal | 1200 | 950 | 800 | ||
| power operated traverse: cross | 320 | 320 | 265 | ||
| power operated traverse: vertical | 425 | 375 | 400 | ||
| minimum distance from left hand table end to centre of spindle | 185 | 245 | 250 | ||
| maximum safe weight on table | kg | 600 | 400 | 350 (H & V) 250 (U) | |
| swivel of table to either side | degrees | - | 45 | 45 (U) | |
| MILLING SPINDLE | number of speeds | no. | 18 | ||
| speed range | rpm | 35.5 - 1800 | |||
| diameter of front bearing | mm | 95.263 | 95.263 | 85.725 | |
| spindle nose | ISO | 50 | |||
| swivel of milling head to either side | degrees | 45 (V) | - | 45 (V) | |
| vertical quill movement | mm | 70 (V) | - | 70 (V) | |
| min/max distance, centre of milling spindle/lower face of milling spindle to table top surface | 70/495 (H) | 55/430 | 83/483 (H) 65/535 (V) | ||
| 60/555 (V) | - | 68/468 (U) | |||
| distance from spindle centre to lower face of overarm | 180 (H) | 180 | 160 (H & U) | ||
| distance from spindle centre to column face | 400 (V) | - | 350 (V) | ||
| FEEDS | number of feeds | no. | 24 | 24 | 18 |
| feed range - longitudinal & cross | mm/min | 8 - 1600 | 4 - 800 | 16 - 800 | |
| feed range - vertical | 1.6 - 320 | 1.6 - 320 | 4 - 200 | ||
| rapid traverse - longitudinal & cross | 4000 | 2000 | 3200 | ||
| rapid traverse - vertical | 800 | ||||
| POWER | main motor | kW/rpm | 7.5/1500 | 7.5/1500 | 5.5/1500 |
| feed motor | 3/3000 | 3/3000 | 1.5.1500 | ||
| SPACE REQUIRED | length x width x height | cm | 386 x 253 x 214 (H) | 345 x 253 x 209 | 255 x 250 x 207 (H) |
| 386 x 206 x 217 (V) | 255 x 196 x 197 (V) | ||||
| 255 x 313 x 201 (U) | |||||
| PACKING CASE | length x width x height | 260 x 245 x 230 | 260 x 245 x 230 | 230 x 195 x 210 | |
| WEIGHT | net / gross (approximately) | kg | 3600/4500 (H) | 3700/4600 | 2400/3200 (H) |
| 3700/4600 (V) | 2500/3300 (V & U) | ||||
| note: all specifications are subject to change without notice | |||||