The CarvLock vise series from Kurt offers a new "systems" approach to high precision workholding. The 80,000 psi ductile iron base has superior vibration dampening characteristics. The ability to carve part profiles on all four sides of the movable jaws adds versatility and economical advantages.

The DL430, DL640 and DL800 DoubleLock vises offer cost saving productivity by maximizing the number of parts in the work envelope.

The DLH430, DLH640 and DLH800 hydraulic DoubleLock vises from Kurt offer two clamping stations with a part capacity of 3" x 4" (DLH430, 4" x 6" (DLH640) and 6" x 8" (DLH800). The hydraulic DoubleLock vise provides repeatable clamping for high accuracy machining and handles a higher horsepower cut than the manual version. The compact design features a wide range of clamping forces up to 12,600 lbs.

The ClusterTower integral vise tower is highly rigid to achieve workpiece immobility and to dampen cutter induced vibration. The new clutch design automatically returns to the correct position to eliminate timing problems. Pre-load adjustment is standard. Part capacity is up to 3" x 4" on the 4" tower and up to 4" x 6" on the 6" tower - in eight clamping stations. Alternatively, on the single station 6" conversion model it opens up to 9.96", and on the single station 4" conversion model it opens up to 7.55".

The CarvLock ClusterTower integral vise tower combines the features of the ClusterTower with the CarvLock vise system.

The Versatile Lock vise - available in manual, air or hydraulic version - is the industry's ultimate single station CNC vise. It offers ultra-precision functioning through these important design features: the original, time proven Kurt AngLock design prevents parts from lifting upward under heavy clamping loads. The "pull-type" jaw clamping reduces jaw stationary deflection by at least 80%. The one piece vise body and stationary jaw provide greater strength while reducing weight.

Use the Versatile Lock in this configuration for the added benefit of easier part programming in the Y-axis positive direction. It also reduces the reach-over distance, making part loading safer and easier for the operator.

The DU68 Fixture Vise from Kurt offers a new "systems" approach to precision workholding. The 80,000 psi ductile iron base has suerior vibration dampening characteristics. The ability to carve part profiles on all four sides of the movable jaws adds versatility and economical advantages.

The original Kurt AngLock D-Series vises are designed for precision part clamping on basic machine tools such as knee-type mills, grinders and machining centres. D-Series vises are ideal for use in running production parts where data, flatness and parallelism are important. You can precision bore, tap, drill, grind and finish with high accuracy on most parts made of die cast aluminum, steel or iron in your Kurt AngLock vises. No other brand can give you the time-proven accuracy of the Kurt AngLock vises. All Kurt vises have a friction reducing, needle bearing, thrust collar. The needle bearing increases jaw clamping pressure.