Gerardi Precision Modular Vises

Manufactured under rigid quality control. Only the most suitable materials are used, and the accuracy of even the smallest components is assured.

List Price $ 1,225.00

Further advantages of the precision GERARDI vises, built completely in hardened and ground steel, are:

order no. 303-20000

jaw width

maximum opening between jaws

The vise is supplied complete with workstop, a pair of positioning key nuts, a box wrench and a T wrench at no extra charge

Possibility to interchange quickly the mechanical blocking device with the hydraulic or the pneumatic blocking device or even with other solutions (even custom made)

STANDARD and XL vises come in 6 different sizes of widths and openings, including a version with narrow-width ground jaws (to work with the vise positioned on its side) or with super narrow jaws (to place vises side by side). All the vises can be mounted on a swivel base, which can be bought later, as can all other combinations (modular elements such as extensions and stack type jaws, pull down jaws, floating jaws, prismatic for round pieces, solid with single or double step, soft or case hardened, with adjustable set screws, hydraulic control etc.

Made completely of hardened & ground high quality steel (HR60C - precise within 20 micron). The high precision ensures / enables the interchangeability of every component of the modular system, quick & precise positioning with respect to the fixed jaw, to match the vises between them, very accurate repeatability of work piece position.

Movable jaw built in one solid piece: higher rigidity & no bending

Fixed jaw with 5mm x 5mm step matchable to the prismatic movable jaw (which allows to clamp round pieces and plates without parallels).

Eight threaded holes on the jaws to fix extension elements or stack type jaws.

Pull down jaw plates for a perfect blocking of the workpiece against the vise base.

Before using the vises, wishing to use the downward jaw option, loosen the screws part 381 and 382 by one quarter of a turn in order to allow jaw plates part 230-236 to run from top to bottom obtaining a downward clamping, which holds the workpiece flat and parallel against the vise base.